產品組成：放線架、除磷機、冷軋機（2臺）、牽引機、轉向機構、高速調直切短機、對齊落料架、變頻、伺服控制系統。
Product composition: Pay-off rack, descaling machine, cold mills (2 sets), tractor, steering mechanism, high-speed straightening and cutting machine, alignment blanking frame, frequency conversion and servo control system
產品概述：該生產線節能、高效、操作簡便、故障率低。軋制后的冷軋帶肋鋼筋無需進入收線打包,直接進入高速調直機進行在線調直和自動剪切。具有剪切誤差小,生產效率高、故障率低等特點，完全實現了不停機連續生產的效果，大大的降低了勞動力投入和電力消耗。
Product overview: This production line is characterized by energy conservation, high efficiency, convenient operation and low fault rate. After rolling, the cold-rolled ribbed steel bars don't need take-up and packaging and directly enter the high-speed straightening machine for on-line straightening and automatic cutting. With the characteristics such as a small shearing error, a high production efficiency and a low fault rate, this production line fully realizes the continuous production effect without shutdown and greatly reduces labor input and power consumption.
|
產品代號
Product code |
LZDL150A |
LZDL150B |
|
原材料直徑
Diameter of raw material |
6.5-12 |
6.5-14 |
|
軋制成品直徑
Diameter of mill product |
5、6、7、8、9、11 |
5-12 |
|
最高軋制速度
Highest rolling speed |
140-150米/分
140-150 m/min |
140-150米/分 |
|
綜合產能：噸/月Comprehensive production capacity: t/month |
1600噸/月
1600 t/month |
1800噸/月 |
|
實際電耗：噸/度
Actual power consumption: t/KWH |
12-14度/噸
12-14 KWH/t |
12-14度/噸 |
|
易損件消耗：元/噸
Consumption of wear parts: yuan/t |
4-6元/噸
4-6 yuan/t |
4-6元/噸 |
|
標配可下料長度
Available blanking length of standard configuration |
1.5米-12米
1.5m-12m |
1.5米-12米 |
|
切斷定尺誤差
Cutting length error |
±5mm |
±5mm |
|
不直度偏差：mm/m
Nonstraightness deviation: mm/m |
≤3mm |
≤3mm |
|
總裝機容量：kw
Total installed capacity: kw |
85.5kw |
105kw |
|
調速方式
Speed regulation mode |
變頻調速
Frequency conversion speed regulation |
變頻調速
Frequency conversion speed regulation |
|
牽引主機型號
Traction host model |
JZQ750 |
JZQ850 |
|
減徑牽引數量
Reducing traction quantity |
2個 |
2個 |
|
調直牽引數量
Straightening traction quantity |
2個 |
2個 |
|
剪切控制方式
Cutting control mode |
伺服 |
伺服 |
|
定尺控制方式
Cutting length control mode |
光電開關或選配PLC
Photoelectric switch or optional PLC |
光電開關或選配PLC |
|
卸料方式
Discharging mode |
自動對齊料架“不停機生產” |
自動對齊料架“不停機生產” |
|
軋輥潤滑冷卻方式
Roll lubricating and cooling mode |
皂化液或拉絲粉 |
皂化液或拉絲粉 |
|
設備總重量：噸
Total weight of equipment: t |
約8.5噸 |
約9.5噸 |
|
